First, thank you for your very clear post. Have you added the hardware ID of your card to the inf file then tried that? All I did next was right click and update driver from the same folder that I installed from on legacy. I did learn something about driver editing though so it was not a complete waste of time trying to get the other one to work. I would try going through the install steps again, or as another commenter stated after getting it to work: Correspondingly, the following section exists immediately after the above heading in both of these. Some of the other forums I found on this same issue though most of them do not mention the U2 card are as follows:
|Date Added:||23 February 2006|
|File Size:||41.68 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Hey, thanks for the mod driver, and for sharing it with us.
It suggested that I contact the manufacturer. Thanks for any and all help, I am trying to get an LTO2 tape drive to work so I can back up all of my data, to many drives failing these days, gig tape seems a reasonable solution if I could get it to work. I installed sdaptec driver but I have a Device status: Glad to be of assistance!
White was able to get his U2 card working in Windows XP bit using windods modified pnpscsi. This happened even when I tried to install the driver using the Add Legacy Hardware option. By continuing to use this website, you agree to their use.
Adaptec AHA-2940-2940W Free Driver Download
Ok, this should be fixed now, try it and wimdows me know if you have any issues. My issue comes on the port mapping inwindows 7.
Very happy this was a help to you!
I am trying it now, but after a series of totally frustrating mind crushing searches, this is a radical step forward. Also resurrected my old Microtek Scanmaker 35T Plus slide scanner. There are a few lines in the dvsjs.
Sorry my bad english. This is a great fix, thank you very much. I did learn something about driver editing though so it was not a complete waste of time trying to get the other one to work.
This is a SCSI printer? Then I was able to install the driver that you and others have used djsvs. Working perfect on Windows 10 latest build.
Download Adaptec AHA/W PCI SCSI Controller
Leave a Reply Cancel reply Enter your comment here Robert, My applogies for not seeing this until now. So really thx and i can say a lot of people need this driver!!! Thank you so much for doing this and more importantly for sharing.
I had 3 other scsi cards before and could not get them to work, but the exact model he used did not require any changes to the code. Ahz-2940w/2940uw step was to get the driver for the scanner. If anyone is interested just let me know. Best regards Thomas Henden, from Oslo, Norway! My applogies for not seeing this until now.
Notify me of new comments via email. I purchased adaptce and it worked just fine. I thought, people have had to run into this before me. Glad you got yours working! Before install the fall update, it works correctly. I would also try going into device manager and throwing out the scsi card, then add a legacy device by hand, and point it to the driver folder.
Let me know if you get it working.